( * )  Required Field   New or Reconditoned New Reconditioned Type of flow * Single Phase 2 Phase Process Fluid Composition: (mole%) Click here to enter Process Fluid Composition Gas Molecular weight / Sp.Gr. *   Mole.wt Sp.gr Gas Compressibility factor Flow rates(Gas)*   Minimum     Lbs/hr. BBL/D MMSCMD Maximum     Lbs/hr. BBL/D MMSCMD Normal     Lbs/hr. BBL/D MMSCMD Flow rates(Liquid)*   Minimum     Lbs/hr. BBL/D MMSCMD Maximum     Lbs/hr. BBL/D MMSCMD Normal     Lbs/hr. BBL/D MMSCMD Density   Lbs/cu.ft Kg/cu.m Viscosity   Cp cSt Specific heat   Btu/lb-deg.F Kcals/kg-deg.C Thermal conductivity Btu/sq.ft-deg.F-Ft Kcals/sq.m-deg.C-m Inlet Temperature*   Minimum     Deg.F Deg.C Maximum     Deg.F Deg.C Normal     Deg.F Deg.C Outlet Temperature*   Minimum     Deg.F Deg.C Maximum     Deg.F Deg.C Normal     Deg.F Deg.C Inlet Pressure*   Minimum     psi Kg/Sq.cm Maximum     psi Kg/Sq.cm Normal     psi Kg/Sq.cm Outlet Pressure*   Minimum     psi Kg/Sq.cm Maximum     psi Kg/Sq.cm Normal     psi Kg/Sq.cm Coil Configuration * Single Split Downstream pressure if regular /Choke is used * psi Kg/Sq.cm Type of bath liquid Bath temperature Deg.F Deg.C Process heat Coil working pressure psi Kg/Sq.cm Process heat Coil design Code non-code coil Max. Coil design pressure psi Kg/Sq.cm Allowable pressure drop across coil psi Kg/Sq.cm Fouling resistance no. Fuel gas * Methane Propane Type of Burner controls required * Pneumatic controls Electrical and electronic controls For pneumatic controls *   - Pneumatic signal is by    Instrument Gas Instrument Air - Supply pressure    psi Kg/Sq.cm - Instrument gas     Sweet Sour For Electrical/Electronics Controls *   - Voltage    - Phase    Single phase 2 phase 3 phase - Frequency      Cycles/sec Insulated * Yes No Other notes (eg. Application details?)